Ford Focus Service Manual: Air Cleaner

Ford Focus Service Manual / Powertrain / Engine / Intake and Forced Induction / Air Cleaner

Disconnect the Mass Air Flow (MAF) sensor electrical connector.

Loosen the clamp and separate the Air Cleaner (ACL) outlet pipe from the ACL assembly.
- To install, tighten to 3 Nm (27 lb-in).

Remove the 2 bolts and the ACL assembly.
- To install, tighten to 9 Nm (80 lb-in).

To install, reverse the removal procedure.

Intake Air Distribution and Filtering

The air intake system consists of the following: Air Cleaner (ACL) ACL element Mass Air Flow (MAF) sensor ACL outlet pipe The air intake system: cleans intake air with an ACL el ...

Intake Manifold

Intake Manifold (View 1 of 3) Item Part Number Description 1 14A464 Engine Oil Pressure (EOP) switch electrical connector (part of 12C508) 2 ...

More about Ford Focus:

Ford Focus Crankshaft End Play
Special Tool(s) Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) or equivalent NOTE: Refer to the appropriate Section 303-01 for the specification. Install the Dial Indicator Gauge with Holding Fixture. Position the crankshaft to the rear ...