Ford Focus Service Manual: Camshaft Runout
Special Tool(s)
|
Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) or equivalent |
NOTE:
Refer to the appropriate Section 303-01 for the specification.
- NOTE:
Camshaft journals must be within specifications before checking runout.
Using the Dial Indicator Gauge with Holding Fixture, measure the camshaft runout.
- Camshaft must be supported on the first and last camshaft bearing journal.
- Rotate the camshaft and subtract the lowest Dial Indicator Gauge reading from the highest Dial Indicator Gauge reading.
Camshaft Position (CMP) Sensor
Material
Item
Specification
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil
XO-5W20-QSP (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12
(Can ...
Camshaft Surface Inspection
Inspect camshaft lobes for pitting or damage in the contact area. Minor
pitting is acceptable outside the contact area.
...
More about Ford Focus:
Ford Focus Flywheel Runout Check
NOTICE: Do not clean the dual mass flywheel with any kind of fluid. Use a
dry cloth only or damage to the dual mass flywheel may occur.
NOTICE: Do not clean the gap between the primary and secondary mass. Only
clean the bolt connection surface and the clutch surface or damage to the flywheel
...
Nissan Frontier - Instrument Panel - Keys - Brake system
© 2016-2026 Copyright www.ffguide.net
