Ford Focus Service Manual: Engine Mount

Ford Focus Service Manual / Powertrain / Engine / Engine Block / Engine Mount

Special Tool(s)

Engine Support Bar 303-F072

Coolant Expansion Tank

Item	Part Number	Description
1	W701107	Coolant expansion tank bolt (2 required)
2	8C045	Coolant expansion tank

Engine Mount

Item	Part Number	Description
1	W520214	Engine mount nut (2 required)
2	W710332	Engine mount bolt (2 required)
3	W712325	Engine mount stud bolt
4	6F012	Engine mount

Removal and Installation

Remove the 2 expansion tank bolts.
- To install, tighten to 4 Nm (35 lb-in).

Lift the coolant expansion tank off of the engine mount stud bolt and position it aside.

Install the Engine Support Bar.

Remove the 2 engine mount nuts.
- To install, tighten to 90 Nm (66 lb-ft).

Remove the 2 bolts, stud bolt and the engine mount.
- To install, tighten to 48 Nm (35 lb-ft).

To install, reverse the removal procedure.

Cylinder Head Temperature (CHT) Sensor

Item Part Number Description 1 9H589 Cylinder Head Temperature (CHT) sensor electrical connector 2 12A674 CHT sensor Removal and Inst ...

Seals and Gaskets

...

More about Ford Focus:

Ford Focus Principle of operation
CAUTION: Using the system with the engine off will drain the battery. Voice recognition enables operation of the system without the need to divert your attention from the road ahead in order to change settings, or receive feedback from the system. Whenever you issue one of the defined c ...