Ford Focus manuals

Ford Focus Service Manual: Seat Backrest - Rear - Disassembly and Assembly

Ford Focus Service Manual / Body / Seating / Seats / Seat Backrest - Rear - Disassembly and Assembly

Disassembly

NOTE:

For component identification and locations, refer to Seat — Exploded View, Rear in this section.

  1. Remove the rear seat backrest. For additional information, refer to Seat Backrest — Rear in this section.
  1. Remove the backrest cover. For additional information, refer to Seat Backrest Cover — Rear in this section.
  1. Remove the backrest foam pad.
    • Route the release strap through the hole in the foam pad.
  1. Release the retainer and detach the release cable from the backrest frame.
  1. Remove the 2 nuts and backrest latch.
    • To install, tighten to 22 Nm (16 lb-ft).
  1. To assemble, reverse the disassembly procedure.
Seat Backrest - Front - Removal and Installation
Removal WARNING: Never probe the electrical connectors on air bag, Safety Canopy® or side air curtain modules. Failure to follow this instruction may result in the accidental deployment of thes ...

Seat Backrest - Rear - Removal and Installation
Seat Backrest — Rear   Item Part Number Description 1 — Backrest assembly, 60 percent 2 — Backrest assembly, 40 percent 3 ...

More about Ford Focus:

Ford Focus Coolant Pump
Material Item Specification Motorcraft® Premium Gold Engine Coolant VC-7-B (US); CVC-7-B (Canada) WSS-M97B51-A1 Coolant Expansion Tank   Item Part Number Description 1 W701107 Coolant expansion tank bolt (2 required) ...

© 2016-2020 Copyright www.ffguide.net