Nissan Frontier: Do-it-yourself - Lights
Basic information
- Room light
- Map lights
- Headlight assembly
- Fog light/Fog light assembly (if so equipped)
- Bed lights (if so equipped)
- High-mount stop light/cargo light
- Rear combination light
- License plate lights
Headlights
For additional information about Nissan Frontier headlight bulb replacement, follow the instructions provided in this section and use the correct bulb type for your specific vehicle equipment.
Temporary fogging may appear inside the exterior light lenses during rain, after a car wash, or when there is a temperature difference between the inside and outside of the lens. This light moisture haze is normal and does not indicate a malfunction. If large water droplets collect inside the lens, it is recommended that you visit a NISSAN dealer for inspection and service.
If headlight replacement or service is required, it is recommended that you visit a NISSAN dealer for proper diagnosis, replacement parts, and installation.
Exterior and interior lights
Basic information
This Nissan Frontier is equipped with LED lights in selected locations.
Visit a NISSAN dealer for LED light replacement, the correct replacement bulb type, or any bulb replacement procedure not specifically listed in this section.
- Headlight (Type A) (if so equipped)*
Turn/Park- Wattage (W): 28/8
- Bulb No.: 7444NA
- Map lights (Type A) (if so equipped)
- Wattage (W): 8
- Bulb No.: -
- Room light (Type A) (if so equipped)
- Wattage (W): 8
- Bulb No.: -
- Vanity mirror light (if so equipped)*
- Wattage (W): 1.4
- Bulb No.: -
- High-mounted stop light/cargo light*
- Wattage (W): 12.8
- Bulb No.: 912
* It is recommended that you visit a NISSAN dealer for replacement.
Always check with the Parts Department at a NISSAN dealer for the most current bulb and parts information for your Nissan Frontier.
Replacement procedures
All other lights are classified as type A, B, C, or D depending on their design and installation method.
When replacing a bulb, first remove the lens and/or cover carefully using a suitable tool. Use a cloth to help protect the surrounding trim and lens from scratches.
: Indicates bulb removal
: Indicates bulb installation
Map light (Type A) (if so equipped)
Use a cloth 1 to protect the housing while removing or installing the Nissan Frontier map light lens or bulb.
Room light (Type A) (if so equipped)
Use a cloth 1 to protect the housing while working on the room light assembly.
Correct light operation is important for visibility, signaling, interior convenience, and overall safety. After replacing any bulb, always confirm that the Nissan Frontier light operates properly before driving.
