Ford Focus Service Manual: Oil Filter Adapter

Removal

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section  100-02.

1. Disconnect the Engine Oil Pressure (EOP) switch electrical connector.

1. Remove the EOP switch.

1. Remove and discard the oil filter.

1. Remove the 4 bolts and the oil filter adapter.
   • Discard the gasket.

Installation

1. Using a new gasket, install the oil filter adapter and the 4 bolts.
   • Tighten to 25 Nm (18 lb-ft).

1. NOTE:

   Lubricate the engine oil filter gasket with clean engine oil prior to installing the oil filter.

   Install a new oil filter.

   • Tighten the oil filter three-fourths turn after the oil filter gasket makes contact with the oil filter adapter.

1. NOTE:

   Apply thread sealant to the EOP switch threads.

   Install the EOP switch.

   • Tighten to 15 Nm (133 lb-in).

1. Connect the EOP switch electrical connector.

1. Top off the engine with clean engine oil.