Fitting the navigation unit
Insert the navigation unit into the holder until you hear a distinct click.
Adjusting the holder
1. Unlock.
2. Adjust the holder to the desired position.
3. Lock.
Note: Make sure that the navigation unit holder is locked in position.
Removing the navigation unit
USB port
Floor matsFord Focus Cylinder Bore Taper
NOTE: Refer to the appropriate Section 303-01 for the specification.
Measure the cylinder bore at the top, middle and bottom of piston ring travel
in 2 directions as indicated. Verify the cylinder bore is within the wear limit.
The difference indicates the cylinder bore taper. If the cyl ...