Ford Focus Service Manual: Accelerator Pedal

Ford Focus Service Manual / Powertrain / Internal Combustion Powertrain Control / Engine Control / Accelerator Pedal

Item	Part Number	Description
1	14A464	Accelerator pedal sensor electrical connector
2	9F836	Accelerator pedal and sensor assembly
3	W702751	Accelerator pedal and sensor nut (3 required)

Removal and Installation

Disconnect the accelerator pedal sensor electrical connector.

Remove the 3 nuts and the accelerator pedal and sensor assembly.
- To install, tighten to 9 Nm (80 lb-in).

To install, reverse the removal procedure.

Acceleration Control

The acceleration controls consist of the accelerator pedal and sensor assembly. The engine management system electronically operates the throttle of the engine in response to accelerator pedal mo ...

Throttle Body

Item Part Number Description 1 W713443 Throttle Body (TB) bolt (4 required) 2 9E926 TB 3 9E936 TB gasket 4 14A4 ...

More about Ford Focus:

Ford Focus Cylinder Bore Taper
NOTE: Refer to the appropriate Section 303-01 for the specification. Measure the cylinder bore at the top, middle and bottom of piston ring travel in 2 directions as indicated. Verify the cylinder bore is within the wear limit. The difference indicates the cylinder bore taper. If the cyl ...