Ford Focus manuals

Ford Focus Service Manual: Accessory Drive Belt Tensioner

Ford Focus Service Manual / Powertrain / Engine / Pulleys and Belts / Accessory Drive Belt Tensioner

Removal and Installation

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section  100-02.
  1. Remove the 2 bolts and accessory drive belt splash shield.
    • To install, tighten to 9 Nm (80 lb-in).
  1. Using the hex feature, rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt from the tensioner.

  1. NOTE:

    The accessory drive belt tensioner must be replaced as a complete unit.

    Remove the 2 bolts and the accessory drive belt tensioner.

    • To install, tighten to 25 Nm (18 lb-ft).
  1. To install, reverse the removal procedure.
Crankshaft Pulley
Special Tool(s) Alignment Plate, Camshaft 303-465 (T94P-6256-CH) Holding Tool, Crankshaft Damper 303-1416 Timing Peg, Crankshaf ...

Accessory Drive Belt
Removal and Installation With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section  100-02. Remove the 2 bolts and the accessory drive belt ...

More about Ford Focus:

Ford Focus Using voice control
System operation The order and content of the voice controls are given in the following lists. The tables show the sequence of user voice commands and system responses for each available function. < > indicates a number or stored name tag to be inserted by the user. Short cuts There ...

© 2016-2024 Copyright www.ffguide.net