Ford Focus Service Manual: Anti-Lock Brake System (ABS) Module

Ford Focus Service Manual / Chassis / Brake Control and Vehicle Dynamics / Dynamics Control / Anti-Lock Brake System (ABS) Module

Special Tool(s)

Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool

Item	Part Number	Description
1	2C286	Hydraulic Control Unit (HCU)
2	2M101	ABS module screws (4 required)
3	2C013	ABS module

Removal and Installation

Remove the Hydraulic Control Unit (HCU) . For additional information, refer to Hydraulic Control Unit (HCU) in this section.

Remove the 4 ABS module-to-HCU screws and the ABS module.
- To install, tighten to 2 Nm (18 lb-in).

To install, reverse the removal procedure.
- For vehicles equipped with AdvanceTrac®, carry out the IVD Initialization sequence. Follow the scan tool directions.

Anti-Lock Control

Anti-Lock Braking The ABS consists of the following components: ABS module — attached to the Hydraulic Control Unit (HCU) , but can be serviced separately from the HCU . Front wheel spe ...

More about Ford Focus:

Ford Focus About this handbook
Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this handbook. The more that you know about it, the greater the safety and pleasure you will get from driving it. WARNING: Always drive with due care and attention when using and operat ...