Ford Focus Service Manual: Brake Caliper Anchor Plate
Removal and Installation
| Item | Part Number | Description |
|---|---|---|
| 1 | W700672 | Brake caliper anchor plate bolts (2 required) |
| 2 | 2B292 | Brake caliper anchor plate |
- Remove the brake pads. For additional information, refer to Brake Pads in this section.
- Remove the 2 bolts and the brake caliper anchor plate.
- Discard the bolts.
- To install, tighten the new bolts to 125 Nm (92 lb-ft).
- To install, reverse the removal procedure.
- Apply brakes several times to verify correct brake operation.
Brake Caliper
Material
Item
Specification
High Performance DOT 3 Motor Vehicle Brake Fluid
PM-1-C (US); CPM-1-C (Canada)
WSS-M6C62-A or WSS-M6C65-A1
Item
...
Brake Disc
Item
Part Number
Description
1
W700672
Brake caliper anchor plate bolts (2 required)
2
—
Brake caliper and anchor plate assembly
3 ...
More about Ford Focus:
Ford Focus Range Selection
The transaxle range selector has 5 positions: P, R, N, D, L.
Park
In selector lever position P, no gear is selected. The parking pawl is engaged
manually by the selector lever cable and the manual control lever shaft.
For safety reasons, always apply the parking brake whenever the vehicle ...
© 2016-2024 Copyright www.ffguide.net
