Item | Specification |
---|---|
Silicone Brake Caliper Grease and Dielectric Compound XG-3-A | ESE-M1C171-A |
Item | Part Number | Description |
---|---|---|
1 | 2A225 | Lower return spring |
2 | — | Upper return spring (part of 2A225) |
3 | — | Parking brake return spring (part of 2A225) |
4 | 2K286 | Adjustment strut |
5 | — | Brake shoe hold-down clip (2 required) (part of 2A225) |
6 | — | Brake shoe hold-down pin (2 required) (part of 2A225) |
7 | 2200 | Primary brake shoe |
8 | — | Secondary brake shoe (part of 2200) |
Removal and Installation
Make sure the rear brakes are cool to the touch.
Move the parking brake control to the fully released position.
Do not allow the wheel cylinder pistons to fall out of the wheel cylinder bore.
Disconnect the brake shoes from the wheel cylinder.
The strut support spring is under tension.
Remove the secondary shoe from the support.
Make sure that all mating surfaces are free of foreign material.
To install, reverse the removal procedure.
The internal auto-adjuster must be set and the brake shoes centralized to the brake drum.
Adjust the brake shoes. For additional information, refer to Brake Shoe Adjustment in this section.
Ford Focus Drum Brake
The drum brake system consists of the following components:
Brake backing plate
Brake drum
Brake flexible hose
Brake shoe hardware kit
Brake shoes
Self-adjuster
Wheel cylinder
When mechanical force is applied by the driver to the brake pedal, the force
is converted into ...