Disconnect
NOTICE: To prevent damage to the coupler, do not use hand tools to disconnect/connect the C-lock coupler.
NOTE:
Do not remove the lock ring from the C-lock coupler.
Hold the female side of the coupler at the hose connection to prevent the coupler from rotating internally.
Gently twist the lock ring until the ring has rotated approximately 90 degrees.
Slide the C-lock coupler apart from the component fitting.
Rotate the lock ring back to the original locked position.
Connect
The lock ring flexes open slightly to allow the male fitting to enter the C-lock coupler.
NOTE:
The lock ring can be heard as it snaps into the lock position.
Insert the male fitting into the C-lock coupler.Ford Focus Flywheel Inspection - Engine System
Special Tool(s)
Dial Indicator Gauge with Holding Fixture
100-002 (TOOL-4201-C) or equivalent
Holding Tool, Flywheel
303-103 (T74P-6375-A)
NOTICE: Do not clean the dual mass flywheel with any kind of fluid, use a
dry cloth only or damage to ...