Ford Focus Service Manual: Camshaft Runout

Ford Focus Service Manual / Powertrain / Engine / Valvetrain / Camshaft / Camshaft Runout

Special Tool(s)

Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) or equivalent

NOTE:

Refer to the appropriate Section 303-01 for the specification.

NOTE:
Camshaft journals must be within specifications before checking runout.
Using the Dial Indicator Gauge with Holding Fixture, measure the camshaft runout.
- Camshaft must be supported on the first and last camshaft bearing journal.
- Rotate the camshaft and subtract the lowest Dial Indicator Gauge reading from the highest Dial Indicator Gauge reading.

Camshaft Position (CMP) Sensor

Material Item Specification Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Can ...

Camshaft Surface Inspection

Inspect camshaft lobes for pitting or damage in the contact area. Minor pitting is acceptable outside the contact area. ...

More about Ford Focus:

Ford Focus Evaporative Emissions
NOTE: The vehicle emission vacuum routing diagrams are contained in the Description and Operation subsection of the Engine Emissions Control section. Refer to Section 303-08. The Evaporative Emission (EVAP) system consists of the: EVAP canister purge valve. EVAP canister. EVAP ...