Ford Focus Service Manual: Compressor to Condenser Discharge Line
Material
| Item | Specification |
|---|---|
| Motorcraft® PAG Refrigerant Compressor Oil YN-12-D | WSH-M1C231-B |
| Item | Part Number | Description |
|---|---|---|
| 1 | W520413 | A/C compressor discharge fitting nut |
| 2 | W520101 | Compressor-to-condenser discharge line bracket nut |
| 3 | W520413 | A/C condenser inlet fitting nut |
| 4 | 19972 | Compressor-to-condenser discharge line |
| 5 | 19B596 | O-ring seal and gasket seal kit (2 required) |
Removal and Installation
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
- Recover the refrigerant. For additional information, refer to Section 412-00.
- Remove the A/C compressor discharge fitting nut.
- To install, tighten to 15 Nm (133 lb-in).
- Remove the lower radiator air deflector. For additional information, refer to Section 501-02.
- Remove the compressor-to-condenser discharge line bracket nut at the A/C
compressor and disconnect the A/C compressor discharge fitting.
- Discard the O-ring seal and gasket seal.
- To install, tighten to 9 Nm (80 lb-in).
- Remove the condenser inlet fitting nut and disconnect the fitting.
- Discard the O-ring seal and gasket seal.
- To install, tighten to 15 Nm (133 lb-in).
- Remove the compressor-to-condenser discharge line.
- To install, reverse the removal procedure.
- Install new gasket seals and O-ring seals.
- Lubricate the refrigerant system with the correct amount of clean PAG oil. For additional information, refer to Section 412-00.
- Evacuate, leak test and charge the refrigerant system. For additional information, refer to Section 412-00.
A/C Lines
...
Condenser to Evaporator Line
Material
Item
Specification
Motorcraft® PAG Refrigerant Compressor Oil
YN-12-D
WSH-M1C231-B
Item
Part Number
Description
1
...
More about Ford Focus:
Ford Focus Keyless starting
WARNINGS:
The keyless starting system may not
function if the key is close to metal
objects or electronic devices such
as mobile phones.
Always check that the steering
wheel lock is deactivated before
attempting to move your vehicle.
See Steering wheel lock.
Note: A valid passive key ...
© 2016-2024 Copyright www.ffguide.net
