Ford Focus Service Manual: Connecting Rod Cleaning

Ford Focus Service Manual / Powertrain / Engine / Engine Block / Cylinder Block / Connecting Rod Cleaning

NOTICE: Do not use a caustic cleaning solution or damage to connecting rods can occur.

NOTE:
The connecting rod large end is a matched set. The connecting rod cap must be installed on the original connecting rod in the original position. Do not reverse the cap. Parts are not interchangeable.
Mark and separate the parts and clean with solvent. Clean the oil passages.

Connecting Rod Bushing Diameter

NOTE: Refer to the appropriate Section 303-01 for the specification. Use a telescoping gauge to determine the ID of the connecting rod bushing, if equipped. Measure the telescop ...

Connecting Rod Large End Bore

NOTE: Refer to the appropriate Section 303-01 for the specification. Tighten the bolts to specification, then measure the bore in 2 directions. The difference is the connecting rod bore out-o ...

More about Ford Focus:

Ford Focus Door Trim Panel - Rear
NOTE: RH side shown, LH side similar. Item Part Number Description 1 254K05 RH/ 254K06 LH Rear door sail panel 2 275A18 RH/ 275A19 LH Rear door inside handle finish panel 3 N805651 Rear door inside handle bolt 4 ...