Ford Focus Service Manual: Cylinder Head Temperature (CHT) Sensor
Item |
Part Number |
Description |
1 |
9H589 |
Cylinder Head Temperature (CHT) sensor electrical connector |
2 |
12A674 |
CHT sensor |
Removal and Installation
- Pull back the Cylinder Head Temperature (CHT) sensor cover and disconnect
the electrical connector.
- Remove the CHT sensor.
- To install, tighten to 12 Nm (106 lb-in).
- To install, reverse the removal procedure.
Special Tool(s)
Feeler Gauge Set
303-D027 (D81L-4201-A) or equivalent
NOTE: Refer to the appropriate Section 303-01 for the specification.
NOTE: Make sure all cy ...
Special Tool(s)
Engine Support Bar
303-F072
Coolant Expansion Tank
Item
Part Number
Description
1
W701107
Coolant expansio ...
More about Ford Focus:
Ford Focus Power steering fluid check
Vehicles with 1.4L Duratec-16V (Sigma) or 1.6L Duratec-16V (Sigma) or 1.6L
Duratec-16V Ti- VCT (Sigma) engine
The fluid level should come up to the
MAX mark when the engine is cold.
If it drops below the MIN mark, top up
with the specified fluid. See Technical
specifications.
All except ve ...