Item | Specification |
---|---|
Motorcraft® PAG Refrigerant Compressor Oil YN-12-D | WSH-M1C231-B |
Item | Part Number | Description |
---|---|---|
1 | W520413 | Evaporator-to-compressor suction line fitting nut |
2 | W500213 | Evaporator outlet line bracket bolt |
3 | W520413 | Thermostatic Expansion Valve (TXV) fitting nut |
4 | 19835 | Condenser-to-evaporator line |
5 | 19835 | Evaporator outlet line |
6 | 19B596 | O-ring seal and gasket seal kit |
7 | 19B596 | TXV fitting gasket seal kit (2 pieces from kit required) |
Removal and Installation
The condenser-to-evaporator line must also be disconnected at the Thermostatic Expansion Valve (TXV) to remove and discard the gasket seal.
Remove the TXV fitting nut and disconnect the evaporator outlet line and condenser-to-evaporator line from the TXV .
Ford Focus Vehicle Certification Label
Base Engine Calibration Information
Base engine calibration information, sometimes referred to as the powertrain
calibration, is located in the lower right corner of the vehicle certification label.
Engine calibration information is limited to a maximum of 5 characters per line
(2 lines maxim ...