Item | Specification |
---|---|
Dow Urethane Adhesive Betaseal™ Express | — |
Sika Urethane Adhesive Sika Tack ASAP | — |
Ultra-Clear Spray Glass Cleaner ZC-23 | ESR-M14P5-A |
Use either a high-ratio, electric or battery-operated caulk gun that will apply the urethane adhesive with less effort and a continuous bead.
NOTE:
Make sure that all gaps in the urethane adhesive are smoothed into one continuous bead.
Apply urethane adhesive over top of the existing urethane adhesive.The urethane adhesive must cure for a minimum of one hour before testing for air or water leaks.
After the urethane adhesive has cured, check the rear window glass seal for air or water leaks through the urethane adhesive bead and add urethane adhesive as necessary.
Ford Focus Tyre pressure monitoring system
WARNINGS:
The system does not relieve you of
your responsibility to regularly check
the tyre pressures.
The system will only provide a low
tyre pressure warning. It will not
inflate the tyres.
Do not drive on significantly
under-inflated tyres. This may cause
the tyres to overheat and ...