Ford Focus Service Manual: Inertia Fuel Shutoff (IFS) Switch

Ford Focus Service Manual / Powertrain / Engine / Fuel System / Inertia Fuel Shutoff (IFS) Switch

Item	Part Number	Description
1	W710254	Pin-type retainer (2 required)
2	5402344	RH A-pillar lower trim panel
3	W504169	Inertia Fuel Shutoff (IFS) switch bolt (2 required)
4	9341	IFS switch
5	14A464	IFS switch electrical connector

Removal and Installation

Remove the 2 pin-type retainers and the RH A-pillar lower trim panel.

Disconnect the Inertia Fuel Shutoff (IFS) switch electrical connector.

NOTICE: Do not overtighten the fasteners or damage to the switch will occur.

Remove the 2 bolts and the IFS switch.
- To install, tighten to 2 Nm (18 lb-in).

To install, reverse the removal procedure.
- If necessary, reset the IFS switch after the installation has been completed.

Fuel Rail

Material Item Specification Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada) XO-5W20-QSP (US); CXO- ...

Fuel Level Sender

Item Part Number Description 1 — Fuel level sender electrical connector (part of 9A299) 2 9A299 Fuel level sender 3 9H307 F ...

More about Ford Focus:

Ford Focus Tire Pressure Monitoring System (TPMS) Sensor Training
Special Tool(s) Activation Tool, Tire Pressure Monitor 204-363 Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool NOTE: If the vehicle has been stationary ...