Ford Focus Service Manual: Latch Lubrication
Material
| Item | Specification |
|---|---|
| Multi-Purpose Grease XG-4 and/or XL-5, or equivalents | ESB-M1C93-B |
- Open the door.
- Using a screwdriver, fully close the latch (2 clicks).
- Spray the multi-purpose grease into the opening on the door latch for approximately 5 seconds.
- Open the latch using either the interior or exterior door handle.
- Open and close the door several times to circulate the lubricant inside the latch.
- Wipe off any excess grease.
Handles, Locks, Latches and Entry Systems
NOTE: The Smart Junction Box (SJB) is also known as the Generic Electronic
Module (GEM) .
Hood Latch
The hood latch consists of the following components:
Hood latch release handle and cable ...
Stepped Unlock Programming
With the ignition switch in the OFF position, press the LOCK and UNLOCK
buttons on the Remote Keyless Entry (RKE) transmitter simultaneously for 4 seconds.
The turn signals flash twice to ...
More about Ford Focus:
Ford Focus Plastics Identification - General Procedures
WARNING: Always
refer to Material Safety Data Sheet (MSDS) when handling chemicals and wear protective
equipment as directed. Examples may include but are not limited to respirators and
chemically resistant gloves. Failure to follow these instructions may result in
serious personal injury.
...
© 2016-2024 Copyright www.ffguide.net
