Ford Focus Service Manual: Passenger Airbag Deactivation (PAD) Indicator

Ford Focus Service Manual / Body / Restraints / Secondary / Passenger Airbag Deactivation (PAD) Indicator

Item	Part Number	Description
1	—	Passenger Air Bag Deactivation (PAD) indicator/ traction control switch electrical connector (part of 14401)
2	7804302	Instrument panel center finish panel
3	13D730	PAD indicator/ traction control switch

Removal and Installation

NOTE:

The Passenger Air Bag Deactivation (PAD) indicator is part of the Hazard/ Traction control switch assembly.

NOTE:
Ignition must be OFF when disconnecting the PAD indicator electrical connector. Otherwise, a DTC will be set in the Restraints Control Module (RCM) memory and must be cleared before releasing the vehicle.
Turn the ignition OFF and wait at least one minute.

Remove the instrument panel center finish panel. For additional information, refer to Section 501-12.

Disconnect the PAD indicator electrical connector.

Disengage the lock tabs and remove the PAD indicator from the instrument panel center finish panel.

To install, reverse the removal procedure.

Passenger Airbag

Item Part Number Description 1 W713417 Passenger air bag module bolts (2 required) 2 044A74 Passenger air bag module 3 W707281 ...

Driver Airbag

Item Part Number Description 1 — Horn switch electrical connector 2 043B13 Driver air bag module 3 — Driver air bag modul ...

More about Ford Focus:

Ford Focus Fluorescent Dye Leak Detection
Special Tool(s) Cordless/Rechargeable True UV LED Light ES 023-00182 or equivalent R-134a Loop/Add On Injector Kit-Set 219-00069 or equivalent R-134a Manifold Gauge Set 300-R0B40134AE or equivalent R-13 ...