Seals, Rings and Gaskets
Item | Part Number | Description |
---|---|---|
1 | 7D402 | Piston assembly — reverse clutch |
2 | 7A262 | Piston assembly — direct clutch |
3 | 7H359 | Piston — direct clutch balance |
4 | 7A262 | Piston — low/reverse clutch |
5 | W706316-S300 | O-ring — Turbine Shaft Speed (TSS) |
6 | 7H360 | Piston — forward clutch balance |
7 | 7A262 | Piston assembly — forward clutch |
8 | 7D019 | Seals — forward and direct clutch cylinder (4 required) |
9 | 7A248 | Seal assembly — pump |
10 | 7A248 | Seal — pump |
11 | 1177 | Seal assembly — differential |
12 | W706315-S300 | O-ring — Output Shaft Speed (OSS) sensor |
13 | 7N266 | Seal — valve body (2 required) |
14 | 7B498 | Seal — manual control shaft (2 required) |
15 | 7Z302 | Seal — transmission fluid filter |
16 | 7D024 | Seal — overdrive servo cover |
17 | 7D021 | Piston and seal assembly — intermediate and overdrive servo |
18 | 7Z490 | Gasket — solenoid body |
19 | 7C155 | Gasket — control valve body |
20 | 7R284 | Seal — case cover (2 required) |
21 | 7D020 | Seal — reverse clutch cylinder (2 required) |
Ford Focus
Programmable Module Installation (PMI)
Special Tool(s)
Vehicle Communication Module (VCM) and Integrated Diagnostic System
(IDS) software with appropriate hardware, or equivalent scan tool
Programmable Module Installation (PMI) Using the Integrated Diagnostic System
(IDS) When the Original Module is ...