Removal
NOTICE: Do not reinstall any heater mat after removal. The adhesive will not adhere correctly to the foam pad causing it to bunch up or shift out of place. A new heater mat must be installed. Failure to follow this instruction can result in seat component damage and system failure.
NOTICE: If installing a new foam pad, the heater mat cannot be reused. A new heater mat must be installed. Failure to follow this instruction may result in component or system failure.
NOTE:
A new heater mat can be attached to a foam pad where an old heater mat was removed but a used heater mat should not be reattached to any foam pad.
Carefully peel and remove backrest heater mat from the foam pad and discard.Installation
When adhering the heater mat to the foam pad, be sure to position the heater mat so it is straight and free of any wrinkles that may show through the material once the trim cover is reinstalled.
Install the heater mat to the foam pad.
Ford Focus Seat Backrest - Rear - Removal and Installation
Seat Backrest — Rear
Item
Part Number
Description
1
—
Backrest assembly, 60 percent
2
—
Backrest assembly, 40 percent
3
W505264
Backrest-to-hinge bolt, LH (2 required)
4
W505264
Backrest-to-hinge bolt ...