Ford Focus Service Manual: Steering Column Shaft

Ford Focus Service Manual / Chassis / Steering / Steering Wheel and Column / Steering Column Shaft

Item	Part Number	Description
1	3B676	Upper steering column shaft
2	W706229	Upper steering column shaft-to-lower steering column shaft bolt
3	W712882	Upper steering column shaft-to-steering column bolt

Removal and Installation

NOTICE: Do not allow the steering column to rotate while the steering column shaft is disconnected, or damage to the clockspring may occur. If there is evidence that the steering column has rotated, the clockspring must be removed and recentered. For additional information, refer to Section 501-20B.

NOTE:
Use a steering wheel holding device (such as Hunter® 28-75-1 or equivalent).
Using a suitable holding device, hold the steering wheel in the straight-ahead position.

Remove and discard the upper steering column shaft-to-steering column bolt.
- To install, tighten the new bolt to 30 Nm (22 lb-ft).

Remove and discard the upper steering column shaft-to-lower steering column shaft bolt.
- To install, tighten the new bolt to 28 Nm (21 lb-ft).

Collapse and remove the upper steering column shaft.

Steering Column Lock Module

Removal and Installation Item Part Number Description 1 — Ignition switch electrical connector (part of 14401) 2 — Electrical harness pi ...

Steering Wheel

Removal and Installation Item Part Number Description 1 3600 Steering wheel 2 W705985 Steering wheel bolt 3 9C888 Steering ...

More about Ford Focus:

Ford Focus Handles, Locks, Latches and Entry Systems
NOTE: The Smart Junction Box (SJB) is also known as the Generic Electronic Module (GEM) . Hood Latch The hood latch consists of the following components: Hood latch release handle and cable Hood latch Front Door The front door consists of the following components: Door ajar ...