Ford Focus Service Manual: Turbine Shaft Speed (TSS) Sensor

Ford Focus Service Manual / Powertrain / Transmission/Transaxle / Automatic / Transmission Unit / Turbine Shaft Speed (TSS) Sensor

Material

Item	Specification
Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLVC (US); CXT-10-LV12 (Canada)	MERCON® LV
Thread Sealant with PTFE TA-24	WSK-M2G350-A2

Turbine Shaft Speed (TSS) Sensor

Item	Part Number	Description
1	W705604-S439	Bolt
2	7M101	Turbine Shaft Speed (TSS) sensor
3	W706316-S300	O-ring

Removal

Remove the battery tray. For additional information, refer to Section 414-01.

Remove the Air Cleaner (ACL) assembly. For additional information, refer to Section 303-12.

Disconnect the Turbine Shaft Speed (TSS) sensor electrical connector.

Remove the TSS sensor bolt and sensor.
- Check the TSS sensor bore.

Inspect the O-ring seal for nicks or cuts; install a new O-ring if necessary.

Installation

Apply a light coat of clean transmission fluid to the O-ring seal before installation.

NOTE:
Apply thread sealer to the bolt.
Install the TSS sensor and bolt.
- Tighten to 10 Nm (89 lb-in).

Connect the TSS sensor electrical connector.

Install the ACL assembly. For additional information, refer to Section 303-12.

Install the battery tray. For additional information, refer to Section 414-01.

Reverse Clutch

Special Tool(s) Compressor, Clutch Spring 307-015 (T65L-77515-A) Material Item Specification Motorcraft® MERCON® LV Automatic Transmission ...

Main Components and Functions

Overview of Construction and Function Item Description 1 Intermediate/Overdrive (O/D) band 2 Front ring gear planetary gear sets ...

More about Ford Focus:

Ford Focus Steering Wheel Rotation Sensor
Special Tool(s) Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool Item Part Number Description 1 — Steering wheel rotation sensor elec ...