Ford Focus Service Manual: Wheel Speed Sensor - Rear
Ford Focus Service Manual / Chassis / Brake Control and Vehicle Dynamics / Sensors / Wheel Speed Sensor - Rear
| Item | Part Number | Description |
|---|---|---|
| 1 | — | Wheel speed sensor bolt (part of 2C204) |
| 2 | 2C204 | Wheel speed sensor |
Removal and Installation
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
- Remove the wheel speed sensor bolt.
- To install, tighten to 9 Nm (80 lb-in).
- NOTE:
Not all the clips are part of the sensor assembly and may not be reusable.
Disconnect the wheel speed sensor electrical connector.
- Remove the sensor by detaching the pin-type retainer and pulling the sensor grommets out of the clips.
- To install, reverse the removal procedure.
Wheel Speed Sensor - Front
Item
Part Number
Description
1
—
Wheel speed sensor bolt (part of 2C204)
2
2C204
Wheel speed sensor
Removal and Installation
R ...
Wheels/Tires
...
More about Ford Focus:
Ford Focus Hydraulic Control Unit (HCU)
Special Tool(s)
Vehicle Communication Module (VCM) and Integrated Diagnostic System
(IDS) software with appropriate hardware, or equivalent scan tool
Material
Item
Specification
High Performance DOT 3 Motor Vehicle Brake Fluid
PM-1-C ...
© 2016-2024 Copyright www.ffguide.net
