Ford Focus Service Manual: Wiper Mounting Arm and Pivot Shaft

Ford Focus Service Manual / Body / Wipers, Washers / Wiper Mounting Arm and Pivot Shaft

Removal and Installation

Remove the cowl panel grille. For additional information, refer to Section 501-02.

Remove the cowl panel support brace.

Disconnect the windshield wiper motor electrical connector.

Remove the 3 bolts and the wiper mounting arm and pivot shaft assembly.
- To install, tighten to 8 Nm (71 lb-in).

To install, reverse the removal procedure.

Washer Pump and Reservoir

Material Item Specification Premium Quality Windshield Washer Fluid (Canada) CXC-37-(A, B, D, and F) (Canada) — Premium Windshield Washer Concentrate (US) ...

Wiper Pivot Arm

Removal and Installation Lift up the covers and loosen the wiper pivot arm nuts approximately 2 turns. Lift the wiper pivot arms and release them from the taper by moving them to one ...

More about Ford Focus:

Ford Focus Diesel particulate filter (DPF)
The DPF forms part of the emissions reduction systems fitted to your vehicle. It filters harmful diesel particulates (soot) from the exhaust gas. Regeneration WARNING: Do not park or idle your vehicle over dry leaves, dry grass or other combustible materials. The DPF regeneration proces ...