Ford Focus Service Manual: Wiper Pivot Arm

Ford Focus Service Manual / Body / Wipers, Washers / Wiper Pivot Arm

Removal and Installation

Lift up the covers and loosen the wiper pivot arm nuts approximately 2 turns.

Lift the wiper pivot arms and release them from the taper by moving them to one side.

Remove the nuts and wiper pivot arms.
- To install, tighten to 27 Nm (20 lb-ft).

To install, reverse the removal procedure.

Wiper Mounting Arm and Pivot Shaft

Removal and Installation Remove the cowl panel grille. For additional information, refer to Section 501-02. Remove the cowl panel support brace. Disconnect the winds ...

Wiper Motor

Removal and Installation NOTE: A new wiper motor assembly comes with the linkage arm installed. Remove the wiper mounting arm and pivot shaft. For additional information, refer to Wiper Mou ...

More about Ford Focus:

Ford Focus Exterior Mirror
Removal and Installation NOTE: Do not remove the exterior mirror assembly when repairing an individual part. Individual components can be installed without removing the exterior mirror. Remove the front door trim panel. For additional information, refer to Section 501-05. ...