Ford Focus manuals

Ford Focus Service Manual: Airbag and Safety Belt Pretensioner Supplemental Restraint System (SRS)

Ford Focus Service Manual / Body / Restraints / Primary / Pre-Tensioner / Airbag and Safety Belt Pretensioner Supplemental Restraint System (SRS)

Refer to the following illustrations for the servicable Supplemental Restraint System (SRS) components.

Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) Components — Illustration 1 of 2


 
Item Part Number Description
1 044A74 Passenger air bag module
2 042D94 Passenger side air curtain
3 611D10 Passenger seat side air bag
4 611D11 Driver seat side air bag
5 042D95 Driver side air curtain
6 043B13 Driver air bag module
7 14A664 Clockspring



Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) Components — Illustration 2 of 2


 
Item Part Number Description
1 14B006 Front impact severity sensor (driver/center front impact sensor)
2 Hazard flasher switch (includes Passenger Air Bag Deactivation (PAD) indicator)
3 14C676 Passenger side impact sensor, first row (pressure sensor, located in passenger door)
4 603B02 Occupant Classification System (OCS) system
5 61202 Passenger safety belt buckle and pretensioner (includes safety belt buckle switch)
6 61203 Driver safety belt buckle and pretensioner (includes safety belt buckle switch)
7 Driver seat position sensor (part of 61704)
8 14C676 Driver side impact sensor, first row (pressure sensor, located in driver door)
9 14B321 Restraints Control Module (RCM)
10 14B345 Driver side impact sensor, second row
11 611B08 Passenger safety belt retractor (includes Belt Tension Sensor (BTS) )
Pre-Tensioner
...

Safety Belt Buckle and Pretensioner
NOTE: RH shown, LH similar.   Item Part Number Description 1 — Safety belt buckle and pretensioner bolt (part of 61202 RH/ 61203 LH) 2 — ...

More about Ford Focus:

Ford Focus Accessory Drive Belt
Removal and Installation With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section  100-02. Remove the 2 bolts and the accessory drive belt splash shield. To install, tighten to 9 Nm (80 lb-in). Using the hex feature, rot ...

© 2016-2019 Copyright www.ffguide.net