Ford Focus Service Manual: Battery, Mounting and Cables Inspection And Verification
Ford Focus Service Manual / Electrical / Battery System / Battery, Mounting and Cables Inspection And Verification
- Verify the customer concern.
- Visually inspect for obvious signs of mechanical or electrical damage.
Visual Inspection Chart
Mechanical Electrical - Battery
- Battery mounting
- Battery cables
- Battery posts
- If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
- If the fault is not visually evident, GO to Pinpoint Test A in the Pinpoint Test procedure.
Battery, Mounting and Cables
Removal and Installation
WARNING: Batteries
contain sulfuric acid and produce explosive gases. Work in a well-ventilated area.
Do not allow the battery to come in contact with flames, sparks or ...
Charging System Inspection And Verification
Special Tool(s)
Vehicle Communication Module (VCM) and Integrated Diagnostic System
(IDS) software with appropriate hardware, or equivalent scan tool
WARNING:
Ba ...
More about Ford Focus:
Ford Focus Valve Seat Width
NOTE: Refer to the appropriate Section 303-01 for the specification.
Measure the valve seat width. If necessary, grind the valve seat to specification.
Measure the intake valve seat width.
Measure the exhaust valve seat width.
Recheck the valve spring installed length ...
© 2016-2026 Copyright www.ffguide.net
