Ford Focus Owners Manual: Brake and clutch fluid check
WARNINGS:
Do not allow the fluid to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your doctor.
If the level is at the MIN mark, have the system checked by a properly trained technician as soon as possible.
Note: The brake and the clutch systems are supplied from the same reservoir.
Top up with fluid that meets the Ford specification. See Technical specifications.
Engine coolant check
Checking the coolant level
WARNING:
Do not allow the fluid to touch your
skin or eyes. If this happens, rinse
the affected areas immediately with
plenty of water and contact your doctor.
CAUTI ...
Power steering fluid check
Vehicles with 1.4L Duratec-16V (Sigma) or 1.6L Duratec-16V (Sigma) or 1.6L
Duratec-16V Ti- VCT (Sigma) engine
The fluid level should come up to the
MAX mark when the engine is cold.
If it drops ...
More about Ford Focus:
Ford Focus Diagnostic Parameters Identification (PID) Chart
Using Output State Control and Accessing PIDs
To confirm that the output state control value was sent by the scan tool and
the PCM has accepted the output state control substitution, a corresponding PID
or PIDs for each output state control parameter should be monitored. Additional
PIDs shou ...
