Ford Focus Service Manual: Brake Shift Interlock Override
NOTE:
If it is necessary to use the brake shift interlock override procedure to move the selector lever out of the PARK position, it is possible that a fuse has blown and the brake lights are not operational. Before driving the vehicle, verify that the brake lights are working.
This vehicle is equipped with a brake shift interlock feature that prevents the selector lever from being moved out of PARK when the ignition is in the ON or RUN position unless the brake pedal is depressed. Perform the following if the selector lever cannot be moved out of the PARK position when the ignition is in the ON position and the brake pedal is depressed:- Apply the parking brake.
- Turn the ignition key to the ON position.
- NOTE:
The relief is located at the front of the access panel.
Remove the access panel.
- Using an suitable tool, depress the brake shift interlock override mechanism on the selector lever, apply the brake, depress the button on the selector lever and move the selector lever into NEUTRAL.
- Start the vehicle.
- To install, reverse the procedure.
Transaxle Electronic Control System
Overview Transmission Control
Item
Description
1
PCM
2
Data Link Connector (DLC)
3
Throttle Position (TP) sensor ...
Output Shaft Speed (OSS) Sensor
Material
Item
Specification
Motorcraft® MERCON® LV Automatic Transmission Fluid
XT-10-QLVC (US); CXT-10-LV12 (Canada)
MERCON® LV
Output Shaft Speed (OSS) Sen ...
More about Ford Focus:
Ford Focus Steering Linkage
The steering linkage consists of the following components:
Inner tie rod
Steering gear
Outer tie-rod end
Steering gear bellows boot
Tie-rod jam nut
Outer tie-rod end nut
Steering linkage is the connection between the steering gear and the wheel knuckles.
The inner tie rods ...
Nissan Frontier - Instrument Panel - Keys - Brake system
