Ford Focus Service Manual: Camber Adjustment - Rear
- Using alignment equipment and the manufacturer's instructions, measure the rear camber.
- NOTE:
If the rear camber is below the minimum specification, the camber can be adjusted +1.0 degree by replacing the upper arm with an upper arm repair kit (3S4Z-1A154-AA).
Replace the upper arm with the +1.0 degree camber upper arm repair kit. For additional information, refer to Section 204-02.
- Recheck alignment to verify camber change and adjust the toe if necessary.
Camber and Caster Adjustment
Camber Adjustment
Using alignment equipment and the manufacturer's instructions, measure the
camber settings.
NOTE: By loosening the strut rod nut and either pushing the strut
in ...
More about Ford Focus:
Ford Focus Manual Transaxle/Transmission - MTX75
The MTX-75 manual transaxle features the following:
Two-part aluminum housing
The input shaft has 2 tapered roller bearings. Input shaft end play is controlled
by a selective shim located under the bearing cup
The output shaft has 2 tapered roller bearings. Output shaft end play is
...
© 2016-2019 Copyright www.ffguide.net