Ford Focus Service Manual: Camshaft Bearing Journal Diameter

Ford Focus Service Manual / Powertrain / Engine / Valvetrain / Camshaft Bearing Journal Diameter

NOTE:

Refer to the appropriate Section 303-01 for the specification.

Measure each camshaft journal diameter in 2 directions.

Camshafts

Special Tool(s) Alignment Plate, Camshaft 303-465 (T94P-6256-CH) Material Item Specification Motorcraft® SAE 5W-20 Premium Synthetic Blend Mo ...

Timing Drive Components

Removal NOTICE: Do not loosen or remove the crankshaft pulley bolt without first installing the special tools as instructed in this procedure. The crankshaft pulley and the crankshaft timing spr ...

More about Ford Focus:

Ford Focus Towing a trailer
WARNINGS: Do not exceed 100 km/h (62 mph). The rear tyre pressures must be increased by 0.2 bar (3 psi) above specification. See Technical specifications. Do not exceed the maximum vehicle and trailer weight stated on the vehicle identification plate. See Vehicle identification plate. ...