Ford Focus Service Manual: Cylinder Bore Out-of-Round

Ford Focus Service Manual / Powertrain / Engine / Engine Block / Cylinder Block / Cylinder Bore Out-of-Round

NOTE:

Refer to the appropriate Section 303-01 for the specification.

Measure the cylinder bore in 2 directions. The difference is the out-of-round.

Cylinder Bore Cleaning

Material Item Specification Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada) XO-5W20-QSP (US); CXO- ...

Cylinder Bore Taper

NOTE: Refer to the appropriate Section 303-01 for the specification. Measure the cylinder bore at the top, middle and bottom of piston ring travel in 2 directions as indicated. Verify the cyl ...

More about Ford Focus:

Ford Focus Engine coolant check
Checking the coolant level WARNING: Do not allow the fluid to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your doctor. CAUTION: Make sure that the level is between the MIN and the MAX marks. Note: Coolant expands when i ...