Ford Focus Service Manual: Instrument Cluster Finish Panel

Ford Focus Service Manual / Body / Body Interior / Dashboard Assembly / Instrument Cluster Finish Panel

Removal and Installation

Lower the steering wheel.

Remove the upper steering column shroud.
- Lift the upper steering column shroud upward to release the upper steering column shroud retaining clips.

Remove the 2 instrument cluster finish panel screws.

Remove the instrument cluster finish panel.
- Pull the instrument cluster finish panel toward the center of the vehicle.

To install, reverse the removal procedure.
- Make sure to align the trim panel retaining clips to the adjacent retaining clip holes.

Instrument Panel Finish Panel - RH

Removal and Installation Lower the glove compartment door. Open the glove compartment door. Depress the 2 glove compartment stops and fully lower the glove compartment door. ...

Steering Column Shroud

Item Part Number Description 1 3530 Upper steering column shroud 2 W713494 Lower steering column shroud screw (3 required) 3 353 ...

More about Ford Focus:

Ford Focus Starting a petrol engine
Note: You can only operate the starter for a maximum of 30 seconds at a time. Cold or hot engine All vehicles CAUTION: When the temperature is below -20ºC (-4ºF), switch the ignition on for at least one second before starting the engine. This will make sure that the maximum fuel ...