Ford Focus Service Manual: Knock Sensor (KS)

Ford Focus Service Manual / Powertrain / Internal Combustion Powertrain Control / Engine Control / Knock Sensor (KS)

Item	Part Number	Description
1	W500025	Knock Sensor (KS) bolt
2	12A699	KS

Removal and Installation

Remove the intake manifold. For additional information, refer to Section 303-01.

NOTE:
The Knock Sensor (KS) must not touch the crankcase vent oil separator.
Remove the bolt and the KS .
- To install, tighten to 20 Nm (177 lb-in).

To install, reverse the removal procedure.

Air Conditioning (A/C) Evaporator Discharge Air Temperature Sensor

Item Part Number Description 1 — A/C evaporator discharge air temperature sensor electrical connector (part of 18B604) 2 19C734 A/C evap ...

Catalyst Monitor Sensor

Special Tool(s) Socket, Exhaust Gas Oxygen Sensor 303-476 (T94P-9472-A) Material Item Specification High Temperature Nickel Anti-Seize Lubrica ...

More about Ford Focus:

Ford Focus Changing a bulb
WARNINGS: Switch the lights and the ignition off. Let the bulb cool down before removing it. We recommend that you ask your dealer to change the bulbs if your vehicle is fitted with Xenon headlamps. There is a risk of injury due to high voltage. CAUTIONS: Do not touch the glass of ...