Ford Focus Service Manual: Oil Level Indicator and Tube

Ford Focus Service Manual / Powertrain / Engine / Engine Lubrication / Oil Level Indicator and Tube

Material

Item	Specification
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada) XO-5W20-QSP (US); CXO-5W20-LSP12 (Canada)	WSS-M2C945-A

Item	Part Number	Description
1	6750	Oil level indicator
2	W500211	Oil level indicator tube bolt
3	6754	Oil level indicator tube
4	6754-B	O-ring seal

Removal and Installation

Remove the oil level indicator and position aside.

Remove the oil level indicator tube bolt.
- To install, tighten to 10 Nm (89 lb-in).

Remove the oil level indicator tube and discard the O-ring seal.
- To install, lubricate the new O-ring seal with clean engine oil.

To install, reverse the removal procedure.

Oil Filter Adapter

Material Item Specification Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada) XO-5W20-QSP (US); CXO- ...

Oil Pump Screen and Pickup Tube

Removal With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02. Remove the oil pan. For additional information, refer to Oil Pan ...

More about Ford Focus:

Ford Focus Principle of operation
Electronic stability programme (ESP) WARNING: ESP does not relieve you of your responsibility to drive with due care and attention. without ESP A with ESP B The ESP supports stability when the vehicle starts to slide away from your intended path. This is performed by braking individ ...