Ford Focus Service Manual: Piston To Cylinder Bore Clearance

Cylinder Bore Taper

NOTE: Refer to the appropriate Section 303-01 for the specification. Measure the cylinder bore at the top, middle and bottom of piston ring travel in 2 directions as indicated. Verify the cyl ...

Connecting Rod to Crankshaft Side Clearance

Special Tool(s) Feeler Gauge Set 303-D027 (D81L-4201-A) or equivalent NOTE: Refer to the appropriate Section 303-01 for the specification. Using the Feeler Gauge ...

More about Ford Focus:

Ford Focus Wiper Pivot Arm
Removal and Installation Lift up the covers and loosen the wiper pivot arm nuts approximately 2 turns. Lift the wiper pivot arms and release them from the taper by moving them to one side. Remove the nuts and wiper pivot arms. To install, tighten to 27 Nm (20 lb-ft). ...