Ford Focus Service Manual: Seat Position Sensor

Ford Focus Service Manual / Body / Restraints / Restraints Control / Seat Position Sensor

Item	Part Number	Description
1	—	Seat position sensor electrical connector (part of 14A699)
2	14B416	Seat position sensor
3	—	Seat position sensor lock tab

Position the driver seat to the rearmost and maximum height position.

Depower the Supplemental Restraint System (SRS) . For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering in the General Procedures portion of this section.

Disconnect the seat position sensor electrical connector.

Remove the lock tab from the seat position sensor.

Remove the seat position sensor from the bracket.

To install, reverse the removal procedure.

Repower the SRS . For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering in the General Procedures portion of this section.

Occupant Classification Sensor

Special Tool(s) Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool Production ...

Secondary

...

More about Ford Focus:

Ford Focus Camber Adjustment - Rear
Using alignment equipment and the manufacturer's instructions, measure the rear camber. NOTE: If the rear camber is below the minimum specification, the camber can be adjusted +1.0 degree by replacing the upper arm with an upper arm repair kit (3S4Z-1A154-AA). Replace the u ...