Ford Focus Service Manual: Transaxle Cooling - Description and Operation
The transmission fluid cooling system consists of the following:
- Oil-To-Air (OTA) transmission fluid combo cooler
- Transmission fluid cooler tube assembly
- Transmission fluid cooler inlet tube
- Transmission fluid cooler outlet tube
These vehicles are equipped with an external transmission fluid cooler. The transmission fluid cooler is part of the A/C condenser and cannot be serviced separately. The transmission fluid cooler is mounted in front of the engine radiator. Transmission fluid travels from the transaxle to the transmission fluid cooler and back to the transaxle. The transmission fluid cooler transfers heat from the transmission fluid to the outside air.
Transaxle Cooling
| Item | Part Number | Description |
|---|---|---|
| 1 | 19E908 | Transmission fluid cooler |
| 2 | 7J081 | Secondary latches |
| 3 | 7890A | Transmission fluid cooler outlet tube |
| 4 | 7890B | Transmission fluid cooler inlet tube |
Transmission Fluid Cooler
NOTE: The transmission fluid cooler is part of the A/C condenser
assembly and cannot be serviced separately.
If installation of a new transmission fluid cooler is required, install a
new c ...
More about Ford Focus:
Ford Focus Valve Seat Width
NOTE: Refer to the appropriate Section 303-01 for the specification.
Measure the valve seat width. If necessary, grind the valve seat to specification.
Measure the intake valve seat width.
Measure the exhaust valve seat width.
Recheck the valve spring installed length ...
