Ford Focus Service Manual: Brake Caliper Anchor Plate
Removal and Installation
| Item | Part Number | Description |
|---|---|---|
| 1 | W700672 | Brake caliper anchor plate bolts (2 required) |
| 2 | 2B292 | Brake caliper anchor plate |
- Remove the brake pads. For additional information, refer to Brake Pads in this section.
- Remove the 2 bolts and the brake caliper anchor plate.
- Discard the bolts.
- To install, tighten the new bolts to 125 Nm (92 lb-ft).
- To install, reverse the removal procedure.
- Apply brakes several times to verify correct brake operation.
Brake Caliper
Material
Item
Specification
High Performance DOT 3 Motor Vehicle Brake Fluid
PM-1-C (US); CPM-1-C (Canada)
WSS-M6C62-A or WSS-M6C65-A1
Item
...
Brake Disc
Item
Part Number
Description
1
W700672
Brake caliper anchor plate bolts (2 required)
2
—
Brake caliper and anchor plate assembly
3 ...
More about Ford Focus:
Ford Focus Exterior Front Door Handle
Removal and Installation
NOTE: The door glass must be completely raised.
Remove the front door trim panel. For additional information, refer to Section
501-05.
Peel back the watershield.
Remove the exterior door handle access hole grommet from the door (coupe
only). ...
© 2016-2025 Copyright www.ffguide.net
