Ford Focus manuals

Ford Focus Service Manual: Crankshaft Main Bearing Journal Taper and Out-of-Round

Ford Focus Service Manual / Powertrain / Engine / Engine Block / Cylinder Block / Crankshaft Main Bearing Journal Taper and Out-of-Round

NOTE:

Refer to the appropriate Section 303-01 for the specification.

  1. Measure each of the crankshaft main bearing journal diameters in at least 2 directions at each end of the main bearing journal.

Crankshaft Main Bearing Journal Diameter
NOTE: Refer to the appropriate Section 303-01 for the specification. Measure each of the crankshaft main bearing journal diameters in at least 2 directions. ...

Crankshaft Main Bearing Journal-to-Bearing Clearance
NOTE: Refer to the appropriate Section 303-01 for the specification. NOTE: Crankshaft main bearing journals must be within specifications before checking journal clearance. Remove the cranks ...

More about Ford Focus:

Ford Focus A-Pillar Trim Panel
Removal and Installation Remove the instrument panel side trim panel. Remove the 2 pin-type retainers and the A-pillar lower trim panel. Detach the upper portion of the B-pillar trim panel. NOTICE: Use care not to damage the retainer brackets during removal. Rem ...

© 2016-2024 Copyright www.ffguide.net