Ford Focus Service Manual: Gearshift Lever

Ford Focus Service Manual / Powertrain / Transmission/Transaxle / Transmission Shifter Mechanism / Gearshift Lever

Removal and Installation

Item	Part Number	Description
1	7217	Gearshift knob
2	—	Gearshift lever nut (4 required)
3	7K387	Gearshift lever
4	7E395	Shift cable (part of 7E395 assembly)
5	7E395	Selector cable (part of 7E395 assembly)

Remove the gearshift lever knob.
- To install, tighten to 15 Nm (133 lb-in).

Remove the floor console. For additional information, refer to Section 501-02.

Remove the shift cable ends from the gearshift levers in the following sequence.
1. Carefully pry the gearshift cables from the shift levers.
1. Pull back on abutment sleeve and lift cable out of shifter.

Remove the 4 gearshift lever bolts and the gearshift lever.
- To install, tighten to 9 Nm (80 lb-in).

To install, reverse the removal procedure.
- Adjust the gearshift cables. For additional information, refer to Section 308-00.

Gearshift Cables

Removal and Installation Item Part Number Description 1 7E395 Shift cable (part of 7E395 assembly) 2 7E395 Selector cable (part of 7E395 ass ...

Selector Mechanism

Special Tool(s) Adapter for 303-290A 303-290-01 Adapter for 303-290A (Support Leg) 303-290-03A Support Bar, Engine 303-290A ...

More about Ford Focus:

Ford Focus Electronic Compass
The compass signal originates from the compass module, which is integrated into the interior rear view mirror. The compass display is incorporated into the Front Display Interface Module (FDIM) . The buttons that allow the driver to operate the calibration and zone setting procedures are l ...