Ford Focus Service Manual: Pump Assembly

Ford Focus Service Manual / Powertrain / Transmission/Transaxle / Automatic / Transmission Unit / Pump Assembly

Special Tool(s)

Installer, Drive Pinion Oil Seal 205-115 (15058)

Material

Item	Specification
Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLVC (US); CXT-10-LV12 (Canada)	MERCON® LV

Disassembly

Remove the top portion of the pump.

Inspect the lower portion of the pump and gear pocket for nicks, scratches, gouges or wear.

Remove the pump seal.

Inspect the upper portion of the pump for nicks, scratches or gouges.

Inspect the pump gears for nicks, scratches or gouges.

Assembly

NOTE:
The smaller gear has a recess on both sides.
NOTE:
The smaller recess must face away from the torque converter seal.

NOTE:
The larger recess, with the beveled edge, must face toward the torque converter.
Lubricate the gears and thrust washers with clean transmission fluid.

Using the Drive Pinion Oil Seal Installer, install the pump seal.
- Lubricate the gears and thrust washers with transmission fluid.

Install the top portion of the pump and install the pump bolts.
- Tighten to 10 Nm (89 lb-in).

Preliminary Inspection

The following items must be checked prior to beginning the diagnostic procedures: Know and Understand the Concern In order to correctly diagnose a concern, first understand the customer complaint ...

Range Selection

The transaxle range selector has 5 positions: P, R, N, D, L. Park In selector lever position P, no gear is selected. The parking pawl is engaged manually by the selector lever cable and the ma ...

More about Ford Focus:

Ford Focus Selector Lever Knob
Item Part Number Description 1 5404567 Center console trim cover 2 7C453 Transmission Control Switch (TCS) electrical connector 3 — Selector lever knob shroud (part of 7L010) 4 W701894-S437 Selector lever k ...