Intermittent wipe
Pull the lever towards the steering wheel.
Reverse gear wipe
The rear wiper will be activated automatically when selecting reverse gear if:
• the rear wiper is not already switched on, • the wiper lever is in position A, B, C or D and • the front wiper is operating (when set to position B).
The rear wiper will follow the front wiper interval (at intermittent or normal speed).
Rear window washer
WARNING:
Do not operate the washer for more than 10 seconds at a time, and never when the reservoir is empty.
While the lever is pulled towards the steering wheel the washer will work in conjunction with the wipers.
Once the wash and wipe cycle is completed, the wipers will pause and then perform one more wipe to clear the windscreen.
After releasing the lever, the wipers operate for a short time.
Windscreen washers
Adjusting the windscreen washer jetsFord Focus Outer Constant Velocity (CV) Joint Boot
Special Tool(s)
Installer, Constant Velocity Joint Boot Clamp
205-343 (T95P-3514-A)
Material
Item
Specification
Constant Velocity Joint Grease (High Temperature)
XG-5
WSS-M1C258-A1
Removal
Remove the inner CV joint boot. F ...