Ford Focus Service Manual: Striker Adjustment

Ford Focus Service Manual / Body / Doors and Enclosures / Striker Adjustment

Material

Item	Specification
Multi-Purpose Grease XG-4 and/or XL-5	ESB-M1C93-B

NOTE:

Before adjusting the door latch striker plate, verify that the door can be closed easily and fits tightly.

Loosen the door latch striker bolts.

Reposition the door latch striker plate from side to side or up and down as necessary.

Tighten the door striker plate bolts.
- Tighten to 25 Nm (18 lb-ft).

Check the adjustment of the door. For additional information on dimensions, refer to Section 501-35.
- Repeat the procedure as necessary.
- Lubricate the door latch using the specified lubricant.

Stepped Unlock Programming

With the ignition switch in the OFF position, press the LOCK and UNLOCK buttons on the Remote Keyless Entry (RKE) transmitter simultaneously for 4 seconds. The turn signals flash twice to ...

More about Ford Focus:

Ford Focus Diagnostic Parameters Identification (PID) Chart
Using Output State Control and Accessing PIDs To confirm that the output state control value was sent by the scan tool and the PCM has accepted the output state control substitution, a corresponding PID or PIDs for each output state control parameter should be monitored. Additional PIDs shou ...