Ford Focus manuals

Ford Focus Service Manual: Air Inlet Duct

Item Part Number Description
1 Air inlet mode door actuator electrical connector (part of 18B604)
2 Air inlet duct screw (2 required)
3 Air inlet duct (part of 19B555)

Removal and Installation

  1. Remove the heater core and evaporator core housing. For additional information, refer to Heater Core And Evaporator Core Housing in this section.
  1. Disconnect the air inlet mode door actuator electrical connector.
  1. Remove the 2 air inlet duct screws.
  1. Detach and remove the air inlet duct.
  1. To install, reverse the removal procedure.
Air Cleaner Outlet Pipe
Disconnect the crankcase ventilation tube and vacuum tube from the Air Cleaner (ACL) outlet pipe. Loosen the 2 ACL outlet pipe clamps. Remove the ACL outlet pipe. To insta ...

Engine Lubrication

More about Ford Focus:

Ford Focus Toe Adjustment - Front
Using a suitable steering wheel holding device, lock the steering wheel in the straight ahead position. Using alignment equipment and the manufacturer's instructions, measure the toe. Loosen the tie-rod end jam nuts. Remove the steering gear boot outer clamps ...

© 2016-2019 Copyright