Ford Focus Service Manual: Coolant Expansion Tank

Ford Focus Service Manual / Powertrain / Engine / Engine Cooling / Coolant Expansion Tank

Item	Part Number	Description
1	8N029	Overflow hose
2	W701107	Coolant expansion tank bolt (2 required)
3	8C045	Coolant expansion tank

Removal and Installation

Using a suitable suction device, siphon the coolant from the coolant expansion tank.

Disconnect the overflow hose from the coolant expansion tank.

Remove the 2 coolant expansion tank bolts.
- To install, tighten to 4 Nm (35 lb-in).

Lift and remove the coolant expansion tank.

To install, reverse the removal procedure.

Fill the coolant expansion tank. Refer to Cooling System Draining, Filling and Bleeding for the recommended coolant mixture and fill level.

Coolant Pump

Material Item Specification Motorcraft® Premium Gold Engine Coolant VC-7-B (US); CVC-7-B (Canada) WSS-M97B51-A1 Coolant Expansion Tank Ite ...

Thermostat Housing

Material Item Specification Motorcraft® Premium Gold Engine Coolant VC-7-B (US); CVC-7-B (Canada) WSS-M97B51-A1 Power Steering Tube and A/C Compressor &n ...

More about Ford Focus:

Ford Focus Introduction - Gasoline Engines
Introduction Note: The descriptions and specifications contained in this manual were in effect at the time this manual was approved for publication. Ford Motor Company reserves the right to discontinue models at any time, or change specifications or design without notice and without incurring ...